Thermally Stable Nanocrystalline Aluminum Alloys Processed by Mechanical Alloying and High Frequency Induction Heat Sintering

The current study investigated the influence of milling
time and ball-to-powder (BPR) weight ratio on the microstructural
constituents and mechanical properties of bulk nanocrystalline Al;
Al-10%Cu; and Al-10%Cu-5%Ti alloys. Powder consolidation was
carried out using a high frequency induction heat sintering where the
processed metal powders were sintered into a dense and strong bulk
material. The powders and the bulk samples were characterized using
XRD and FEGSEM techniques. The mechanical properties were
evaluated at various temperatures of 25°C, 100°C, 200°C, 300°C and
400°C to study the thermal stability of the processed alloys. The
processed bulk nanocrystalline alloys displayed extremely high
hardness values even at elevated temperatures. The Al-10%Cu-5%Ti
alloy displayed the highest hardness values at room and elevated
temperatures which are related to the presence of Ti-containing
phases such as Al3Ti and AlCu2Ti. These phases are thermally stable
and retain the high hardness values at elevated temperatures up to
400ºC.





References:
[1] C.C. Koch, “Intermetallic matrix composites prepared by mechanical
alloying - a review,” Materials Science and Engineering, Vol. A244,
1998, pp. 39-48.
[2] H.D.K.H, “Mechanically alloyed metals,” Materials Science and
Technology, Vol. 1, 2000, pp. 1404-1411.
[3] M.A. Shaikh, M. Iqbal, J.I. Akhter, M. Ahmad, Q. Zaman, M. Akhtar,
M.J. Moughal, Z. Ahmed, and M. Farooque, “Alloying of immiscible
Ge with Al by ball milling,” Materials Letters, Vol. 57, 2003, pp. 3681-
3685.
[4] E. Ma and M. Atzmon, “Phase transformations induced by mechanical
alloying in a binary system,” Materials Chemistry and Physics, Vol. 39,
1995, pp. 249-267.
[5] C.C. Koch and J.D. Whittenberger, “Review: mechanical
milling/alloying of Intermetallic,” Intermetallics, Vol. 4, 1996, pp. 339-
355.
[6] C. Suryanarayana, “Mechanical alloying and milling,” Progress in
Materials Science, Vol. 46, 2001, pp. 1-184.
[7] Kwang-Min Lee and In-Hyung Moon, “High temperature performance
of dispersion-strengthened A1-Ti alloys prepared by mechanical
alloying,” Materials Science and Engineering, Vol. A 185, 1994, pp.
165-170.
[8] R. Lerf and D. G. Morris, “Mechanical alloying of Al-Ti alloys,”
Materials Science and Engineering, Vol. A 128, 1990, pp. 119-127.
[9] L. Shaw, H. Luo, J. Villegas and D. Miracle, “Thermal stability of
nanostructured Al93Fe3Cr2Ti2 alloys prepared via mechanical alloying,”
Acta Materialia, Vol. 51, 2003, pp. 2647–2663.
[10] T.T. Sasaki, T. Ohkubo and K. Hono, “Microstructure and mechanical
properties of bulk nanocrystalline Al-Fe alloy processed by mechanical
alloying and spark plasma sintering,” Acta Materialia, Vol. 57, 2009, pp.
3529-3538.
[11] T.T. Sasaki, T. Mukai and K. Hono, “A high-strength bulk
nanocrystalline Al-Fe alloy processed by mechanical alloying and spark
plasma sintering,” Scripta Materialia, Vol. 57, 2007, pp. 189-192.
[12] M. Krasnowski and T. Kulik,“Nanocrystalline and amorphous Al-Fe
alloys containing 60-85% of Al synthesized by mechanical alloying and
phase transformations induced by heating of milling products,”
Materials Chemistry and Physics, Vol. 116, 2009, pp. 631-637.
[13] K.I. Moon and K.S. Lee, ”Compressive deformation behavior of
nanocrystalline Al-5at.% Ti alloys prepared by reactive ball milling in H
and ultra-high-pressure hot pressing,” Journal of Alloys and
Compounds, Vol. 333, 2002, pp. 249–259.
[14] K.I. Moon and K.S. Lee, “Development of nanocrystalline Al-Ti alloy
powders by reactive ball milling,” Journal of Alloys and Compounds,
Vol. 264, 1998, pp. 258–266.
[15] ASM Handbook Vol. 2, “Properties and selection: nonferrous alloys and
special-purpose materials,” ASM International, Materials Information
Society, U.S.A., 1990