Recycled Cellulosic Fibers and Lignocellulosic Aggregates for Sustainable Building Materials

Sustainability is becoming a priority for developers and the use of environmentally friendly materials is increasing. Nowadays, the application of raw materials from renewable sources to building materials has gained a significant interest in this research area. Lignocellulosic aggregates and cellulosic fibers are coming from many different sources such as wood, plants and waste. They are promising alternative materials to replace synthetic, glass and asbestos fibers as reinforcement in inorganic matrix of composites. Natural fibers are renewable resources so their cost is relatively low in comparison to synthetic fibers. With the consideration of environmental consciousness, natural fibers are biodegradable so their using can reduce CO2 emissions in the building materials production. The use of cellulosic fibers in cementitious matrices have gained importance because they make the composites lighter at high fiber content, they have comparable cost - performance ratios to similar building materials and they could be processed from waste paper, thus expanding the opportunities for waste utilization in cementitious materials. The main objective of this work is to find out the possibility of using different wastes: hemp hurds as waste of hemp stem processing and recycled fibers obtained from waste paper for making cement composite products such as mortars based on cellulose fibers. This material was made of cement mortar containing organic filler based on hemp hurds and recycled waste paper. In addition, the effects of fibers and their contents on some selected physical and mechanical properties of the fiber-cement plaster composites have been investigated. In this research organic material have used to mortars as 2.0, 5.0 and 10.0 % replacement of cement weight. Reference sample is made for comparison of physical and mechanical properties of cement composites based on recycled cellulosic fibers and lignocellulosic aggregates. The prepared specimens were tested after 28 days of curing in order to investigate density, compressive strength and water absorbability. Scanning Electron Microscopy examination was also carried out.




References:
[1] N. Stern, “Stern review on economics of climate change”, Cambridge University Press, 2006.
[2] A. Bentur and D. Mitchell, “Material performance lessons,” Cement and Concrete Research, vol. 38, 2008, pp. 259–72.
[3] S. Tkac, “The power of micro urban structures, theory of EEPGC – the micro urban energy distribution model as a planning tool for sustainable city development,” SSP – Journal of Civil Engineering, vol. 10, 2015, pp. 29-38.
[4] O. Faruk, A.K. Bledzki, H.P. Fink and M. Sain, “Biocomposites reinforced with natural fibres 2000 – 2010,” Progress in Polymer Science, vol. 37, 2012, pp. 1552-1596.
[5] A.K. Bledzki and J. Gassan, “Composites reinforced with cellulose based fibres,” Progress in Polymer Science, vol. 24, 1999, pp. 221–74.
[6] I. Preikss, J. Skujans, A. Adamovics and U. Iljins, “Evaluation of hemp (Cannabis Sativa L.) quality parameters for building materials from foam gypsum products,” Chemical Engineering Transactions, vol. 32, 2013, pp. 1639–1644.
[7] M. John and S. Thomas, “Biofibres and biocomposites,” Carbohydrate Polymers, vol. 71, 2008, pp. 343–64.
[8] K.G. Satyanarayana, G.G.C. Arizaga and F. Wypych, “Biodegradable composites based on lignocellulosic fibers—an overview,” Progress in Polymere Science, vol. 24, 2009, pp. 982–1021.
[9] P. Wambua, J. Ivens and I. Verpoest, “Natural fibres: can they replace glass in fibre reinforced plastics?” Composites Science and Technology, vol. 63, 2003, pp. 1259–64.
[10] L.C. Roma, L.S. Martello and H. Savastano, “Evaluation of mechanical, physical and thermal performance of cement-based tiles reinforced with vegetable fibers,” Construction and Building Materials, vol. 22, 2008, pp. 668–74.
[11] J. Biagiotti, D. Puglia and J.M. Kenny, “A review on natural fibre-based composites - part I: structure, processing and properties of vegetable fibres,” Journal of Natural Fibers, vol. 1, 2004, pp. 37–41.
[12] J.H. Morton, T. Cooke and S.S. Akers, “Performance of slash pine fibers in fiber cement products,” Construction and Building Materials, vol. 24, 2010, pp. 165–70.
[13] R.D. Tolêdo-Filho, K. Ghavami, G.L. England and K. Scrivener, Development of vegetable fibre-mortar composites of improved durability,” Cement and Concrete Composites, vol. 25, 2003, pp. 185–96.
[14] R.D. Tolêdo-Filho, K. Ghavami, M. Sanjuán and G.L. England, “Free, restrained and drying shrinkage of cement mortar composites reinforced with vegetable fibres,” Cement and Concrete Composites, vol. 27, 2005, pp. 537–46.
[15] M. Bentchikou, A. Guidoum, K. Scrivener, K. Silhadi and S. Hanini, Effect of recycled cellulose fibres on the properties of lightweight cement composite matrix,” Construction and Building Materials, vol. 34, 2012, pp. 451–6.
[16] N. Neithalath, J. Weiss and J. Olek, “Acoustic performance and damping behavior of cellulose–cement composites,” Cement and Concrete Composites, vol. 26, 2004, pp. 359–70.
[17] L. Kidalova, N. Stevulova, E. Terpakova and A. Sicakova, “Utilization of alternative materials in lightweight composites,” Journal of Cleaner Production vol. 34, 2012, pp. 116-119.