Optimizing PelletPAVE™ Rubberized Asphalt Mix Design Using Gyratory Compaction and Volumetrics

In this investigation, rubberized HMA technology was examined to address the most critical forms of pavement distresses in the State of Kuwait, namely, high temperature rutting, and moisture induced raveling. PelletPAVE™ additive was selected as the preferred technology, since it offered a convenient method of directly modifying the exiting local HMA recipe without having to polymer modify the bitumen. Experimental work, using various Pelletpave contents was carried out at Kuwait Institute for Scientific Research (KISR) to design an optimum rubberized HMA formulation prior to conducting a pilot-scale road trial. With the aid of a gyratory compactor, the compaction and volumetric properties of HMAs containing 2.5% and 3.0% Pelletpave additive were investigated at a range of bitumen contents, all by mass of total mix.

• H. Al-Baghli

• Modified bitumen
• rubberized hot mix asphalt
• gyratory compaction
• volumetric properties.

[1] D. Presti, Recycled Tyre Modified Bitumens for Road Asphalt Mixtures: A Literature Review, Construction and Building Materials, Vol. 49, pp. 359-368 (2015)
[2] T. Ma, H. Wang, L. He, J. Chen, Property Characterization of asphalt binders and mixtures modified by different crumb rubbers, J. Mater. Civ. Eng., Vol. 29, Issue 7 (2017)
[3] M. Cope, Performance and Economic Benefits of Paving with Asphalt Rubber, www.rafoundation.org; Rubber Asphalt Foundation (1985)
[4] Sacramento County Department of Environmental Review and Assessment, Report on the Status of Rubberized Asphalt – Traffic Noise Reduction, Nov. (1999).
[5] J. D’Angelo, “Rubberized asphalt study: recycled tire rubber in place of P.G. Polymer Modified Asphalt” Whitepaper issued by Rubberized asphalt Foundation (2013)
[6] G. Way, K. Kaloushi, K. Biligiri, Consuplay Int. and Arizona State University, “Asphalt-Rubber Standard Practice Guide” Rubber Pavement Association (2012)
[7] State of Kuwait, Ministry of Public Works (MPW) Specifications, QCS2014, Section 6- Road works, Part 5- Asphalt Works
[8] AASHTO T 324, Standard Method of Test for Hamburg Wheel-Track of Compacted Asphalt Mixtures.
[9] AASHTO T 324, Standard Method of Test Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage.