Liquid Fuel Production via Catalytic Pyrolysis of Waste Oil

Pyrolysis of waste oil is an effective process to produce high quality liquid fuels. In this work, pyrolysis experiments of waste oil over Y zeolite were carried out in a semi-batch reactor under a flow of nitrogen at atmospheric pressure and at different reaction temperatures (350-450 oC). The products were gas, liquid fuel, and residue. Only liquid fuel was further characterized for its composition and properties by using gas chromatography, thermogravimetric analyzer, and bomb calorimeter. Experimental results indicated that the pyrolysis reaction temperature significantly affected both yield and composition distribution of pyrolysis oil. An increase in reaction temperature resulted in increased fuel yield, especially gasoline fraction. To obtain high amount of fuel, the optimal reaction temperature should be higher than 350 oC. A presence of Y zeolite in the system enhanced the cracking activity. In addition, the pyrolysis oil yield is proportional to the catalyst quantity.





References:
[1] P. Verma, M. P. Sharma, “Review of process parameters for biodiesel production from different feedstocks,” Renewable and Sustainable Energy Reviews, vol. 62, pp. 1063-1071, 2016.
[2] S. Papari, K. Hawboldt, “A review on the pyrolysis of woody biomass to bio-oil: Focus on kinetic models,” Renewable and Sustainable Energy Reviews, vol. 52, pp. 1580-1595, 2015.
[3] E. Biagini, A. Fantei, L. Tognotti, “Effect of the heating rate on the devolatilization of biomass residues,” Thermochimica Acta, vol. 472, no. 1, pp. 55-63, 2008.
[4] J. N. Brown, R. C. Brown, “Process optimization of an auger pyrolyzer with heat carrier using response surface methodology,” Bioresource Technology, vol. 103, no. 1, pp. 405-414, 2012.
[5] L. Ingram, D. Mohan, M. Bricka, P. Steele, D. Strobel, D. Crocker, “Pyrolysis of Wood and Bark in an Auger Reactor: Physical Properties and Chemical Analysis of the Produced Bio-oils,” Energy & Fuels, vol. 22, no. 1, pp. 614-625, 2008.
[6] F. Abnisa, A. Arami-Niya, W. Daud, J. N. Sahu, “Characterization of Bio-oil and Bio-char from Pyrolysis of Palm Oil Wastes,” BioEnergy Research, vol. 6, no. 2, pp. 830-840, 2013.
[7] R. Miandad, M. A. Barakat, M. Rehan, A. S. Aburiazaiza, J. Gardy, A. S. Nizami, “Effect of Advanced Catalysts on Tire Waste Pyrolysis Oil. Process,” Safety and Environmental Protection, 2018.
[8] L. Ying, J. Zhu, Y. Cheng, L. Wang, X. Li, “Kinetic modeling of C2–C7 olefins interconversion over ZSM-5 catalyst,” Journal of Industrial and Engineering Chemistry, vol. 33, pp. 80-90, 2016.
[9] I. M. Rofiqul, H. Haniu, M. Sarker, “Innovation in Pyrolysis Technology for Management of Scrap Tire: a Solution of Energy and Environment,” 2010.
[10] P. T. Williams, A. J. Brindle, “Aromatic chemicals from the catalytic pyrolysis of scrap tyres,” Journal of Analytical and Applied Pyrolysis, vol. 67, no. 1, pp. 143-164, 2003.
[11] J. Shah, M. R. Jan, F. Mabood, “Recovery of value-added products from the catalytic pyrolysis of waste tyre,” Energy Conversion and Management, vol. 50, no. 4, pp. 991-994, 2009.