Durability Properties of Foamed Concrete with Fiber Inclusion

An experimental study was conducted on foamed concrete with synthetic and natural fibres consisting of AR-glas, polypropylene, steel, kenaf and oil palm fibre. The foamed concrete mixtures produced had a target density of 1000kg/m3 and a mix ratio of (1:1.5:0.45). The fibres were used as additives. The inclusion of fibre was maintained at a volumetric fraction of 0.25 and 0.4%. The water absorption, thermal and shrinkage were determined to study the effect of the fibre on the durability properties of foamed concrete. The results showed that AR-glass fibre has the lowest percentage value of drying shrinkage compared to others.





References:
[1] A.C.M, Liew. "New Innovative Lightweight Foam Concrete Technology”, in R.K. Dir, M.D. Newlands, A. McCarthy, Use of Foamed Concrete in Construction. University of Dundee, Scotland, UK: Thomas Telford, p. 45-50, 2005
[2] K.Ramamurthy, E.K.K. Nambiar, G.I.S.Ranjani. "A Classification of Studies on Properties of Foam Concrete”. Cement & Concrete Composites, 31:388-96. 2009.
[3] N. Noordin, H. Awang, "Lightweight Foamed Concrete in Construction Industry” International Conference on Construction and Real Estate Management ICCREM. Penang, Malaysia. p. 1-6. 2005.
[4] K.Y. Foo, B.H. Hameed. "An Overview of Landfill Leachate Treatment via Activated Carbon Adsorption Process”. Journal of Hazardous Materials, 171, 54–60, 2009.
[5] J.H. Tay .” Ash From Oil-Palm Waste as Concrete Material”, Journal of Materials in Civil Engineering. 2, 94-105, 1990.
[6] V. Sata , C. Jaturapitakkul, K. Kiattikomol. "Influence of Pozzolan from Various By-Product Materials on Mechanical Properties of High-Strength Concrete”, Construction and Building Materials. 21, 1589–98, 2007.
[7] P. Chindaprasirt, S. Rukzon, V. Sirivivatnanon. "Resistance to Chloride Penetration of Blended Portland Cement Mortar Containing Palm Oil Fuel Ash, Rice Husk Ash and fly Ash”. Construction and Building Materials. 22, 932-8, 2008.
[8] G. Barluenga and F. Hernandez-Olivares, "Cracking Control of Concretes Modified with Short AR-Glass Fibres at Early Age. Experimental Results on Standard Concrete and SCC” Cement and Concrete Research, 37, 1624 – 1638, 2007.
[9] BSI. BS EN 196-2. Methods of Testing Cement: Chemical Analysis of Cement. London: British Standards Institution, p. 1-54, 2005.
[10] BSI. BS EN 12620: Aggregates for Concrete. London: British Standards Institution, p. 1-60, 2013.
[11] BS 7542 - Method of Test for Curing Compounds for Concrete, 1992.
[12] E.P. Kearsley, P.J. Wainwright. "The Effect of High Fly Ash Content on the Compressive Strength of Foamed Concrete” Cement and Concrete Research, 31, 105-12, 2001.
[13] E.K.K. Nambiar & K. Ramamurthy, "Air-Void Characterisation of Foam Concrete. Cement and Concrete Research” 37, 221-230, 2007.
[14] N. Hearn, R.D. Hooton, and M.R. Nokken, "Pore Structure and Permeability”, Chapter in Significance of Tests and Properties of Concrete and Concrete Making Materials, ASTM STP169D. 2006
[15] E.K.K. Nambiar, & K. Ramamurthy, "Sorption Characteristics of Foam Concrete. Cement and Concrete Research, 37, 1341-1347, 2007.
[16] D. Saje, B. Bandelj, J. Sustersic., J. Lopatic, and F. Saje, "Shrinkage of Polypropylene Fibre-Reinforced High-Performance Concrete.” J. Mater. Civ. Eng, 23(7), 941-952, 2011.