Determination of Alkali Treatment Conditions Effects Which Influence the Variability of Kenaf Fiber Mean Cross Sectional Area

Fiber cross sectional area value is a crucial factor in determining the strength properties of natural fiber. Furthermore, unlike synthetic fiber, a diameter and cross sectional area of natural fiber has a large variation along and between the fibers. This study aims to determine the main and interaction effects of alkali treatment conditions which influence kenaf bast fiber mean cross sectional area. Three alkali treatment conditions at two different levels were selected. The conditions setting were alkali concentrations at 2 and 10 w/v %; fiber immersed temperature at room temperature and 100⁰C; and fiber immersed duration for 30 and 480 minutes. Untreated kenaf fiber was used as a control unit. Kenaf bast fiber bundle mounting tab was prepared according to ASTM C1557-03. Cross sectional area was measured using a Leica video analyzer. The study result showed that kenaf fiber bundle mean cross sectional area was reduced 6.77% to 29.88% after alkali treatment. From analysis of variance, it shows that interaction of alkali concentration and immersed time has a higher magnitude at 0.1619 compared to alkali concentration and immersed temperature interaction which was 0.0896. For the main effect, alkali concentration factor contributes to the higher magnitude at 0.1372 which indicated are decrease pattern of variability when the level was change from lower to higher level. Then, it was followed by immersed temperature at 0.1261 and immersed time at 0.0696 magnitudes.

• Mohd Yussni Hashim
• Mohd Nazrul Roslan
• Shahruddin Mahzan @ Mohd Zin
• Saparudin Ariffin

• Natural fiber
• kenaf bast fiber bundles
• alkali treatment
• cross sectional area.

<p>[1] K. G. Satyanarayana, et al., "Biodegradable composites based on lignocellulosic fibers--An overview," Progress in Polymer Science, vol. 34, pp. 982-1021, 2009.
[2] A. Shalwan and B. F. Yousif, "In State of Art: Mechanical and tribological behaviour of polymeric composites based on natural fibres," Materials & Design, vol. 48, pp. 14-24, 2013.
[3] S. Ochi, "Tensile Properties of Kenaf Fiber Bundle," SRX Materials Science, vol. 2010, 2010.
[4] O. Shinji, "Mechanical properties of kenaf fibers and kenaf/PLA composites," Mechanics of Materials, vol. 40, pp. 446-452, 2008 2008.
[5] X. Li, et al., "Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review," Journal of Polymers and the Environment, vol. 15, pp. 25-33, 2007.
[6] M. C. Symington, et al., "Tensile Testing of Cellulose Based Natural Fibers for Structural Composite Applications," Journal of Composite Materials, vol. 43, pp. 1083-1108, May 1, 2009 2009.
[7] M. Y. Hashim, et al., "Mercerization Treatment Conditions Effects on Kenaf Fiber Bundles Mean Diameter Variability," Applied Mechanics and Materials, vol. 315, pp. 670-674, 2013.
[8] H. Gu, "Tensile behaviours of the coir fibre and related composites after NaOH treatment," Materials & Design, vol. 30, pp. 3931-3934, 2009.
[9] P. Saha, et al., "Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment," Bioresource Technology, vol. 101, pp. 3182-3187, 2010.
[10] L. Boopathi, et al., "Investigation of physical, chemical and mechanical properties of raw and alkali treated Borassus fruit fiber," Composites Part B: Engineering, vol. 43, pp. 3044-3052, 2012.
[11] Y. Nitta, et al., "Cross-sectional area evaluation and tensile properties of alkali-treated kenaf fibres," Composites Part A: Applied Science and Manufacturing, vol. 49, pp. 132-138, 2013.
[12] M. Aslan, et al., "Strength variability of single flax fibres," Journal of Materials Science, vol. 46, pp. 6344-6354, 2011.
[13] I. Van de Weyenberg, et al., "Improving the properties of UD flax fibre reinforced composites by applying an alkaline fibre treatment," Composites Part A: Applied Science and Manufacturing, vol. 37, pp. 1368-1376, 2006.
[14] M. Y. Hashim, et al., "Mercerization Treatment Parameter Effect on Natural Fiber Reinforced Polymer Matrix Composite: A Brief Review," in Proceedings of World Academy of Science, Engineering and Technology, 2012.
[15] A. K. Mohanty, Misra, M, Drzal, L.T, "Surface modifications of natural fibers and performance of the resulting biocomposites: An overview " Composite Interfaces, vol. 8, pp. 313-343, 2001.
[16] Y. Xue, et al., "Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites," Composites Part B: Engineering, vol. 40, pp. 189-196, 2009.</p>