DC-Link Voltage Control of DC-DC Boost Converter-Inverter System with PI Controller

In this paper, the DC-link voltage control of DC-DC boost converter–inverter system is proposed. The mathematical model is developed from four different sub-circuits that depended on the switch positions. The developed differential equations are combined to develop the dynamic model. Transfer function is generated from the switched function model. Fluctuation of DC-link voltage causes connected loads malfunction. For this problem, a kind of traditional controller, the PI controller is applied to achieve constant DC-link voltage. The PI controller gains are obtained based on transfer function step response. The simulation work has been studied by using MATLAB/Simulink software and hardware prototype is implemented with a low-cost microcontroller Arduino Nano. Experimental results are collected by using ArduinoIO library package. Closed-loop DC-link voltage control system is tested with various line and load disturbances. It is found that the experimental results give equal responses with the simulation results.




References:
[1] Daniel W. Hart, Power Electronics, 2011, ISBN 978-0-07-3380674.
[2] Juan Manuel Enrique Gomez, Antonio Javier Barragan Pina, Eladio Duran Aranda and Jose Manuel Andujar Marquez, “Theoretical Assessment of DC/DC Power Converters’ Basic Topologies. A Common Static Model”, Appl. Sci. 2018, Aug 19, 2018.
[3] Victor Hugo Garcia-Rodriguez, Ramon Silva-Ortigoza, Eduardo Hernandez-Marquez, Jose Rafael Garcia-Sanchez, Mario Ponce-Silva and Griselda Saldana-Gonzalez, “A DC Motor Driven by a DC-DC Boost Converter-Inverter: Modeling and Simulation”, 2016 International Conference on Mechatronics and Automotive Engineering (ICMEAE), Nov. 22-25, 2016, pp. 78-83.
[4] Neng Zhang, Danny Sutanto and Kashem M. Muttaqi, “A Buck-Boost Converter Based Multi-Input DC-DC/AC Converter”, 2016 IEEE International Conference on Power System Technology Wollongong NSW, Sep/Oct. 2016, pp. 1-6.
[5] Xianhao Yu, Qin Lei, and Fang Zheng Peng, “Boost Converter – Inverter System Using PWAM for HEV/EV Motor Drive”, 2012 Twenty-Seventh Annual IEEE, Applied Power Electronics Conference and Exposition (APEC), 2012, pp. 946-950.
[6] Katsuhiko Ogata, “Modern Control Engineering”, 5th Edition, Pearson Electronics, India, 2010.
[7] P. Sanchis, A. Ursua, E. Gubia and L. Marroyo, “Design and experimental operation of a control strategy for the buck–boost DC–AC inverter”, IEEE Proceedings on Electric Power Applications, vol. 152, ni.3, May 2005, pp. 660-668.
[8] Pablo Sanchis, Alfredo Ursæa, Eugenio Gubia, and Luis Marroyo, “Boost DC–AC Inverter: A New Control Strategy”, IEEE Transactions on Power Electronics, vol. 20, no. 2, Mar 2005, pp.343-353.
[9] Lopamudra Mitra and Nibedita Swain, “Closed Loop Control of Solar Powered Boost Converter with PID Controller”, 2014 IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2014, pp. 1-5.
[10] Arka Bhattacaharya, P. Rja and A. Pavan Kumar, “Modeling and Simulation of a Controlled DC-AC Converter System Using Sliding Mode Controller Mechanism”, 2011 International Conference on Process Automation, Control and Computing, 2011, pp. 1-8.
[11] Liviu Dinca and Jenica-Ileana Corcau, “P.I. Versus Fuzzy Control For A DC to DC Boost Converter”, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM), 2016, pp. 803-808.
[12] Arnab Ghosh and Subrara Banerjee, “Design of Type III Controller for DC-DC Switch Mode Boost Converter”, 6th IEEE Power India International Conference (PIICON), pp. 1-6, New Dahli, India, 2014.
[13] L. Nousiainen and T. Suntio, “DC-Link Voltage Control of a Single-Phase Photovoltaic Inverter”, 6th IET International Conference on Power Electronics, Machines and Drives (PEMD 2012), Bristol, U.K, Sep. 2011, pp. 1-6.
[14] X. Felix Joseph, Dr. S. Pushpakumar, D. Arun Dominic and D.M. Mary Synthia Regis Prabha, “Design and Simulation of a Soft Switching Scheme for a DC-DC Boost Converter with PI Controller’, 2011 International Conference on Emerging Trends in Electrical and Computer Technology, 2011, pp. 370 – 374.
[15] Jinbo Liu, Wenlong Ming, Fanghong Gao, “A New Control Strategy for Improving Performance of Boost DC/DC Converter Based on Input-Output Feedback Linearization”, 2010 8th World Congress on Intelligent Control and Automation, 2010, pp. 2439 – 2444.
[16] Sanjeevikumar Padmanaban, Ersan Kabalci, Atif Iqbal, Haitham Abu-Rub and Olorunfemi OjoE, “Control strategy and hardware implementation for DC-DC boost power circuit based on proportional integral compensator for high voltage application”, Volume 18, Issue 2, June 2015, pp. 163-170.
[17] Saswati Swapna Dash and Byamakesh Nayak, “Control analysis and experimental verification of a practical dc–dc boost converter”, Volume 2, Issue 3, Dec 2015, pp. 378-39.
[18] Mario Gavran, Mato Fruk and Goran Vujisic, “PI Controller for DC Motor Speed Realized with Arduino and Simulink”, IEEE, MIPRO, May 22-26, pp. 1557-1561, 2017.
[19] Gokhan Altintas, Mehmet Onur Gulbahce and Derya Ahmet Kocabas, “Nonideal Analysis, Design and Voltage Mode Control of a Boost Converter”, 57th International Scientific Conference, Power and Electrical Engineering of Riga Technical University (RTUCON), 13-14 Oct 2016, pp.1-6.