Combination of Standard Secondary Raw Materials and New Production Waste Materials in Green Concrete Technology

This paper deals with the possibility of safe incorporation fluidised bed combustion fly ash (waste material) into cement matrix together with next commonly used secondary raw material, which is high-temperature fly ash. Both of these materials have a very high pozzolanic ability, and the right combination could bring important improvements in both the physico-mechanical properties and the better durability of a cement composite. This paper tries to determine the correct methodology for designing green concrete by using modern methods measuring rheology of fresh concrete and following hydration processes. The use of fluidised bed combustion fly ash in cement composite production as an admixture is not currently common, but there are some real possibilities for its potential. The most striking negative aspect is its chemical composition which supports the development of new product formation, influencing the durability of the composite. Another disadvantage is the morphology of grains, which have a negative effect on consistency. This raises the question of how this waste can be used in concrete production to emphasize its positive properties and eliminate negatives. The focal point of the experiment carried out on cement pastes was particularly on the progress of hydration processes, aiming for the possible acceleration of pozzolanic reactions of both types of fly ash.





References:
[1] Doležal, Jaroslav. Jaderné a klasické elektrárny. Praha: České vysoké učení technické v Praze, 2011. ISBN 978-80-01-04936-5.
[2] Stevens, W., Robl,T., Mahboub,K. The cementitious and pozzolanic properties of fluidized bed combustion fly ash. 2009 World of Coal Ash (WOCA) Conference, Lexington Ky, USA, 2009
[3] Ťažký, M.; Bodnárová, L.; HELA, R., Physico-mechanical properties of lightweight concrete with fluidized bed combustion fly ash based light weight aggregate, Materials Science Forum, ISSN 1662-9752, Trans Tech Publication, Switzerland, 2017
[4] Šulc, R, Formáček, P, Škvára, F., Peterová, A., Snop, R., Svoboda, P. Physical and mechanical characteristics of fly ash from coal burning. Konference Popílky ve stavebnictví. ASVEP, Brno, 2015. VUT v Brně, Fakulta stavební, ISBN 978-80-214-5192-6
[5] Škvára, F., Snop, R., Šulc, R., Zlámalová Cílová, Z., Peterová, A., Kopecký, L. Fluidní sulfátovápenatý popílek. Konference Popílky ve stavebnictví. ASVEP, Brno, 2015. VUT v Brně, Fakulta stavební, ISBN 978-80-214-5192-6
[6] Ťažký, M.; Hela, R., Elimination of negative influence of fluidized bed combustion fly ash on viscosity of cement mix, Binders, Materials and Technologies in Modern Construction II, ISSN 0255-5476, ISBN 9783038357407, Trans Tech Publication, Switzerland, 2016